Let's Make Robots!

Arduino C++

After the MkI chassis bellied out on the stairs I rebuilt the chassis to give an extra 55mm (about 2inches) clearance in the center. The new chassis is also 50mm … Read more
Navigate around via ultrasound
Using a
                This is Bert. he is a small development platform that i plan on using to get a grips with the arduino programming language before i take on … Read more
navigates in any direction , balanced walk, objects tracing, tracks and follows objects in its surroundings, various sitting and resting positions, shakehand, wall following
Using a
  INU 2.0 is a servo actuated quadraped dog robot ,that takes input from a  SHARP sensor and a TSOP sensor.It is controlled by  arduino duemilanove atmega328. My … Read more
Navigate by sudden deceleration (collision sensing)
Using a
This is a prototype of a robot car I am designing for the classroom. The idea is to create a kit, cheap and simple enough for the classroom with enough … Read more
Avoid colissions via ultrasound
Using a
This is simple avoider made from 2 motors, arduino, ultrasonic ping and aluminium sheet. I called it - TurtleBot I spend some time for mechanics and now I must … Read more
This is my second puppy robot and the first to use a QuadBot kit. The robot is quite simple, just a pan / tilt kit mounted on a QuadBot chassis with DAGU's new … Read more
Tries to turn by matching front wheel steering angle to rear wheel PWM differential steering.
Using a
This is a robot built mostly to explore how you can steer with a combination of differential rear steering and a single servo controlled front wheel. This is a … Read more
Navigate around via ultrasound
Using a
Introduction: MASHR is my attempt to build a start here robot for beginners. It is Arduino based, but didn't use a standard Arduino booard. An Romeo all-in-one … Read more
Well this is GPSRover 1.0. its not my first robot but it is my first on LMR.     So far all it does is move between different saved waypoints but im thinking of … Read more
Multipurpose manually controlled platform with wireless video.
Using a
--------------------------------MOST RECENT UPDATE----------------------------------------------------------- Read more
My first robotics project and introduction into the world of electronics in general. I was going to grab the Parallax BOE Bot but while doing my research I ran … Read more
I might be breaking some LMR rules, but this robot was built on my spare time while funded by the University of Oslo  and my employer APPLY Sørco, covering the … Read more
My First Robot It's a simple modified RC buggy, designed to follow light. Picture (Before the Tragedy)   TRAGEDY! Read more
Flies autonomously with directional control
Using a
I started this project quite a while ago.   My first inspiration came from a hobby parts site: http://www.hobbycity.com.  They advertised a new brushless motor … Read more
Cuts shapes with better precision then me :D
Using a
Pictures:  - the front   - the back - left - right - the power unit Read more