This is Salt-E, a modified medium tank built from a www.rocketbrandstudios.com kit.
The original Arduino Nano was not working correctly, so I ordered a 'Arduino … Read more
I 'finally' have completed my obstacle avoiding disc-o-bot (inspired from the start here robo ;) will be uploading videos too soon..... :)
A new … Read more
*Note: Fritzing Schematic, and Arduino Sketch attached as Zip.*
This is a 2 motor robot controlled with an Infrared remote control. Arduino needs the IR Library … Read more
I made a crane from Merkur( something like Meccano). It has two motors, one with encoder. The position of the hook is sensed by the encoder and the position of the … Read more
Hi,
This is second version of my robot Primo. It is Lighter, Faster, Smaller and nicer (I think :D ). It is controlled by Picaxe-08M. I used one IR sensor connected … Read more
Pictures in High res. now available on: https://picasaweb.google.com/117478617231202648212/Primo?authkey=Gv1sRgCLy4gIfUuZSIrwE
The Code is on English now … Read more
This is the first prototype of the Balancing Robot. In this version , I used two sharp sensors to control the motors.this is as first step till the IMU comes from … Read more
Hey folks! This is my first robot of this kind. Orginally I wanted to use a different controllerboard with everything built onto it already, but programming it so … Read more
I just finished my very first robot today. Not having a Ping ultrasonic sensor I searched my parts box for ideas on how to avoid objects. After having realized that … Read more
this is my last lo-tech beambot.i built is for artcraft fun.
the bare bones photo vore is a very classic beam design by wilf.the sch on most website was wrong.the … Read more
To start, I'd like to say this is my first robot, but, since I had electronic- experience, and so many people have done the SHR, and I had a good idea, B.I.L. was … Read more
tǎnkè is the Chinese word for tank. Ordered this 1/16 scale model of the German tank Tiger with metal gear motors and metal tracks at taobao and started to build … Read more
this robotic turtle is my second wheel bot.
i diy a arduino board with rs232 bootloader.i am going to make a L298N motor driver board.
the overall debugging will … Read more
This is actually an experiment. It shall proof that even a very simple designed rover with a simple micro controller, program and sensors is able to drive at least … Read more
You know how it is sometimes, you start something and everything along the way goes wrong.
This project started as something to get me into object recognition, but … Read more
Hi all,
Here is my first robot using a micro-controller ! I started with the Start Here guide and it evolves a bit. I rewrote the code, it might not be as good as … Read more
Hi all,
An other robot built a few months. This one detects collisions, go backward and change direction.
Once again, no micro-controller inside... but it's the … Read more
Skydiver can move on the ground or be lifted on a weather balloon. During its whole mission the robot measures the background resp. cosmic radiation and capture … Read more
This is my entry for the DAGU "Beginners Robot Chassis Challenge". It is prelimary named Pacman, but the name maybe change in the future. Pacman was my first idea, … Read more
Hi, BlueFarAway is my first attempt of building a robot. It´s like a playground where I can experiment. I got an Arduino for another purpose and wondered how far … Read more
Update - took a few photos to magically transform this blog from a mere "schematic" to a fully fledged, utterly incomplete "robot".
Like a few others here, I'm … Read more
Hi everybody,
Just working on the second version of my model rocket launching robot. The first version was remote controlled (see video), the second version is … Read more
First and foremost I would like to thank Fritzl for coming up with this masterpiece in the first place. If it wasn't for him I would have not gotten into robotics … Read more
The features of this robot are
obstacle avoidance
line following and detection of the traffic lights.It follows the white path on a black surface and detect the … Read more
This is my "start here" robot.
It is not very solid yet... i'm working on that, and also on the code... trying something similar to the navigation from part 2 but … Read more
