Let's Make Robots!

Sharp IR

Interacts with human beings, meows and purrs
Using a
RoboKitten is a research platform for studying human-robot interactions. The robot is 330 mm tall and is equipped with 3 servos that control the eyes and eyelids … Read more
Roster is the Processing file and the other is for the Arduino oooooo spooky image the black and wight 1 that is ! Read more
Obstacles avoidance via infrared sensor
Using a
Hello, Greetings from Hong Kong. This is my first Arduino project. I have worked with the handyboard and NXT few years ago. The Arduino seems popular and easy to … Read more
Obstacle avoidance, education
Using a
I built this super basic robot as a start-here style bot for a presentation I'm doing in a few weeks. I wanted something I could demonstrate building in realtime … Read more
Drive around, beep, blink and look good
Using a
A few months ago I stumbled upon a couple of plastic spheres sizes 16cm and 4cm in diameter. The spheres came in separate halves, making them ideal for a small … Read more
Balance on two wheels and navigate autonomously around the room
Using a
One of my dreams has been to make a kit of a miniature balancing robot. I've been working on this some time now, coming up with a way to make a reasonable number … Read more
Avoids obstacles, builds thermal images
Using a
This was a first robot - really just about getting to try out the technology, learn techniques and get up to speed with how to do this stuff. It avoids obstacles … Read more
Drives slowly and nearly unstoppably
Using a
Note: I have posted a review of PropellerHeadGeek's kits on LMR and on my blog.   Good at climbing.   Side view.   Here's lookin' at you, kid. Read more
navigate in various ways, teach me about robotics
Using a
Hi! MAEP 2.0 is the second version of MAEP (please check it out if you haven't already). I won't go into all the details about things that are the same as the … Read more
This is my first robot project. I've had an interest in electronics for as long as I can remember and began playing with PICAXE about 5 years ago, but never really … Read more
Primarily a Development Platform
Using a
Videos posted of sandy in operation. (3-1-2012)   This is my first attempt at robotics and the first time here at LMR so apologies if all this is obvious to … Read more
I built TrackBot a test platform for various technologies. It's easy to add sensors and servos. I'm using it to prototype the desgin of B4, a BeagleBoard based … Read more
Update April 1st   Well the dust has cleared and I have finished and submitted my Google Science Fair project and I very happy with it.  I have added the site … Read more
Rolls around and doesn't hit anything...
Using a
My first moving robot. It's an arduino based bot that uses two continuous servos, adafruit motor shield, and Sharp IR. The wheels were scavenged off of a toy car … Read more
20/11/11 This is my new autonomous line following bot starting to take shape and a much more slicker design than my last bot attempt. It's made out of clear … Read more
Hi, This is second version of my robot Primo. It is Lighter, Faster, Smaller and nicer (I think :D ). It is controlled by Picaxe-08M. I used one IR sensor connected … Read more
This is humphrey the tempremental robot. he is my variation of the start here robot (why do i refere to it as he) basicly the sme but with tracks and an ausome … Read more
walking straight forward, turn left & right, backwards. Avoiding obstacles with the Sharp IR sensor, beconing, laying down, getting up, glowing blue
Using a
It's beed to long that I submitted something here. Now I got my new workplace in our new home...nothing fancy but mine ;-) There is still a lot of things to improve … Read more
Navigate around via infrared
Using a
MiniBot is a robot I created to test my new nanoDuino boards. It is based in an old Mini Cooper toy car I had. It is a very small car, almost the size of a arduino … Read more
    Pictures in High res. now available on: https://picasaweb.google.com/117478617231202648212/Primo?authkey=Gv1sRgCLy4gIfUuZSIrwE The Code is on English now … Read more
Balance on two Wheels
Using a
This is the first prototype of the Balancing Robot. In this version , I used two sharp sensors to control the motors.this is as first step till the IMU comes from … Read more
Its a sumo bot, line follower, and object avoidance, all in one little package.
Using a
   This robot is a rebuild of my Start Here Robot.  One day I was looking for things to do(other than clean my work bench) and saw my my SHR sitting there and … Read more
Navigate via IR rangefinder and tactile feelers, look nifty
Using a
UPDATED: OCT. 31, '11: Checked complete box \o/ Added a couple of hidden vids of Hexy disturbing people at work. Read more
JAX's picture
I got the SHR because I wanted to turn it into a cat toy. It works; just ask the cats... The CatScan Robot sits patiently waiting for one of our cats (Zena or … Read more
Here we have Boxxy, my SHR. I had originally intended to give it a nice plexi-glass chassis; however, I chose instead to use an old cellphone box. There's something … Read more
I had been learning basic electronics and the use of Arduino in college this year to create musical instruments and interfaces. Now that summer is here and I have … Read more