Let's Make Robots!

Schmitt trigger

Hooking up a Schmitt trigger (74HC14)

I need to hook up a 74HC14 to clean the signal from a QRB1134 IR sensor. I think I know how but I need to make sure. Could it really be this simple:

*Connect pin 14 to 5V (from Arduino)

*Connect pin 7 to ground

*Connect pin 1 to the signal output of the QRB1134

*Connect pin 2 to the Arduino analog in

*Place a .1uF cap between the 5V and the ground wire

Here is the datasheet and an example I used:

www.robotokulu.com/ROBOTOKULU_dosyalar/74HC14.pdf