this was made of my little robot, blinky. he wasn't working and i wanted to make a new bot and i got new parts, so i got this. he will hopefully: make a noise when … Read more
Introdution:
This is my competitor for the LMRv4 Donor Appreciation Robot challenge. Using 5 Dynamixel AX-12+ Servos and an Arduino Mega. Programming has been done … Read more
this is my car robot. it is very simple to make all you need is the base of that "cyclones" project we worked on earlier. you need to stick the motors into the … Read more
i made this project with my friend Ness. we got the parts from a remote control car named "cyclones". all we needed to do is tape or glue the battery pack to the … Read more
here is my robot named blinky. i ordered these parts from @chris the carpenter. he has 4 AAA alkanine batteris, a servo for the head, 2 geared motors, and a few … Read more
Walk with 4 legs (2 DOF) and scan the environment. If an obstacle comes close (treshold programmed) the robot searches for a new direction to go. Using a
This is my 3rd robot and I thought now it was time to make one that walks!
For this robot I used the Keil uVision4 compiler evaluation version. I also used the STM … Read more
I have started finished work on my second robot. It uses a FRED solar engine, and is a really simple circuit; I salvaged a belt and pulley from a cassette player, … Read more
Here he is, after three hours of soldering. His brain is the exact one from the "Junkbots, Bugbots, and Bots on Wheels" book. He's still a work in progress, and I … Read more
This project was named the Scarab not just for it's resemblence to the dung beetle but for it's functional similarity to that animal. In principal this machine is … Read more
This robot uses two SPDT (single pull, double throw) switches, antennas, motors, and a battery pack. The antennas are connected to the switches, and so when the … Read more
This robot is a free formed robot that I made, its like my symet but better. It uses a simple analog circuit that stores up electricity until there's enough to make … Read more
Hi all Thanks for letting me join your site Here is a bot that I designed for the scouts to build it was designed as a maze runner. This one was built by my … Read more
Simple wirecontrolled, some stuff I had, 2 switches, batteryholder, Tamiya twin gearbox some wheels and networkcable. Screw it all together and my daughter got a … Read more
this is my last lo-tech beambot.i built is for artcraft fun.
the bare bones photo vore is a very classic beam design by wilf.the sch on most website was wrong.the … Read more
It's to AT89c2051 as the core,it have a Pyroelectric sensor. It can auto-locking and have 2.4GHz full-color cameras to send images, shell & wheels is made of … Read more
Update August 16, 2011
The PCB boards arrived a day earlier than expected (ordered on a Friday, arrived the following Friday). Eleven brain boards and 66 leg … Read more
Spurt is a brainless line following Beambot. It is based on the Spurt-Mobil from the University of Rostock / Tech. University of Berlin. It is a very cheap robot … Read more
Hi all, This is it!
As I got a fully (more or less) functional CNC (see here: http://letsmakerobots.com/node/24217), I can finally start doing what I have intended … Read more
PartyBot is a modular robot which was designed for the main purpose of being an educative platform to be shown at Campus Parties. This robot was created for the … Read more
Manoeuvrabot is intended to be highly manoruvrable - hence it has four omni-wheels which can each be driven independently from a 4 channel motor controller. … Read more
Hi guys, This is a modified PICO. This is one of my product prototypes. You will find in our online shop in few days.
I use Arduino and 2 ir SHARP distance sensors … Read more
this is my first robot that walks, made in 2006, learning and testing components to participate in LARC2006, Cowbot category.
truncated using two servos, motor and … Read more
this is my new "robot" fully designed by me , its name on-board comes from the way it was designed , its quite literally all on the single printed circuit board ! … Read more
this RC car traverses around normally but takes over control in the case of an obstacle in front of it , that action drives a custom built polarity reverser to move … Read more
