This is the project I am working on atm, relatively happy with the build now and working on coding.
Also attached a first vid of basic moves like sitting down, … Read more
This robot was built more to prove to myself that I could do it than anything else. More on that further down after some specs.
Motors are from Solarbotics "Gear … Read more
I started playing with Arduino a couple of months ago. I stumbled on this site looking for some information and thought it would be a cool idea to built something … Read more
So I build my first wheeled robot. For now it has no special functions or sensors, but I'm planning to add those features later. Robot can be controlled with PC, … Read more
*Note: Fritzing Schematic, and Arduino Sketch attached as Zip.*
This is a 2 motor robot controlled with an Infrared remote control. Arduino needs the IR Library … Read more
Well after a long time away from this hobby I am back again.. I am trying to create a little hobby robot that will hopefully eventually be controlled by voice … Read more
SapoBot is a robot that wonders through spaces avoiding obstacles detects holes on the ground, follow walls and follow lines, to change between behaviors you only … Read more
This a robot that I made with an arduino uno and some HS-55 servos. The top is a little broken and thats why its makes that sound. I may add some sensors, and I … Read more
This is the next iteration of my way to a maze solver. Frame and motors is the same at seen in Wood and Glue roller http://letsmakerobots.com/node/29816
As seen in … Read more
Update: this robot has been replaced by http://letsmakerobots.com/node/29876
First step on my way to a maze solver. This roller only have one TCRT 5000 sensor, it … Read more
This is the first prototype of the Balancing Robot. In this version , I used two sharp sensors to control the motors.this is as first step till the IMU comes from … Read more
This is a Stewart platform. While it is very similar to a delta robot (see my other creations) this one can roll, pitch, and yaw for a full 6 degrees of … Read more
This version of the Delta3 is complete. I have mounted it upside down in a box and added a pen to make it a plotter. I could add a dremel to make it a 3-axis CNC … Read more
Generic experimental Arduino Robot
I put this together one or two years ago and have been fiddling with it ever since. The version in the picture … Read more
Four wheel drive vehicles have always excited my imagination, and this time I joined two Farrusco (Dagu's) chassis in front to front as you can see in the … Read more
Hello I am Tijmen Verhulsdonck 17 years old and come form the netherlands. In the past six months I have been working on a self Balancing robot that you can control … Read more
Forgive me LMR for I hath sinned. I have exchanged good design procedures for copious amounts of hot glue...but the result was my T-3! IK on my I.M.P. project where … Read more
A complete new update :)
Since the old robotic arm was so terrible I decided to spend a pound or two on some acrylic and make robot arm version two, and here it is. … Read more
The first arduino robot I made.
It's simple, he runs around and detects obstacles and walls, changing the side that he runs.
I spent around 60 hours to build this, … Read more
Hello guys.
After hours spent on the internet trying to understand how stuff works i came up with this piece of code. It simply sends out SONY remote codes, but the … Read more
Hello LMR! I am a Mechatronics Engineering student in Canada. This is one of my current projects - IMP. He is the result of the voices in my head exchanging cookie … Read more
