Content in “indoor”

What every tech-nut dreams of; build your own robot! Finally I built my obstacle avoiding rover robot using; Read more

My first robotics project and introduction into the world of electronics in general. I was going to grab the Parallax BOE Bot but while doing my research I ran … Read more

Aye! Since every recruit goes through initiation I just ordered the START HERE kit from picaxe (well most of the parts). Cool!   And then I got hands on a stash of … Read more

ICU is a sub-project of the SWARS (see what a robot sees) project. This time I not just wanted to see what a robot sees, but I also wanted to give the robot the … Read more

Presented here is my rendition of the Start Here robot using a PIC16F690 and programmed in Assembly with the MPASM Assembler.  In addition to the micro, parts … Read more

my first robot, thanks to frits start here and his help I have built a robot. It is simple, it has a speaker, and two motors, thats all.  Im thinking about putting … Read more

This is the first project in this forum. I am working on a 6 wheel platform that can be utilized for various robot applications, carrying different pay loads.  Read more

This is version 1 of my hexapod robot project.  Version 2 is now in development. Full assembly instructions are provided at the instructables.com link. Read more

Navigates using SRF005 , avoids objects Read more

Hi there!! I am proud to show you my first creation! This is a 2DOF hexapod entirely built by myself with a bit of external help for the pratical part. It walks … Read more

This Delta Robot is made from ply wood and aluminium. Cheap servo motors for the positioning. Atmel Attiny2313 for controlling the servos over RS232 with MATLAB. … Read more

Question :- what on earth is  New Mega improved Mr.Tidy doing in Switzerland ?............ ..... To cut a long story short .....OddBot  has done it … Read more

I think, it is one of the cheapest 3-axis robotic arms. It can move, kick and mainly draw in many ways. It is controlled throught PC, which sends command via serial … Read more

I noticed I was slacking in the project updating, so finally I got around to putting up my robot project.  Here it is, the Annihilator Behemoth: Blaster Shark … Read more

Forget to spin the bottle or throw common dice at your next party --- Mr. Random is in the house. Driven by two hacked (continuous rotation) servos, Mr. Random … Read more

My first robot was an autonomous rover based on the "Start Here" robot. So this time I wanted to go one step further and make something different, write my own code … Read more

News (for those who don't want to read the article) -I have got one of the line sensors working.         This is my first robot. I now have one of the line … Read more

This is my first attempt at a robot.  I started off with a Arduino Robot Kit from robotshop.com and modified it a bit from there.  I used a Parallax Ping … Read more

This is my second functioning robot. All the parts are recycled, so it didn't cost me more than a bit of time. The schematics can be found all over the internet, … Read more

This is my first robot which is still a work in progress. My goal is to create a pet robot that charges itself and navigates autonomously. At the time of this … Read more

  This is really Scout_bot version 2.0. I added the pan tilt head (Robotshop.ca) later. Anyways it adds some personality. He is built on  an old telephone base … Read more

Hi everybody! Finally I found the time to start building Mr. Radioactivity. The robot navigates around via Sharp and tactile sensor, measures ionizing radiation via … Read more

Hi ALL!!! I'm from Ukraine, and this is my big project "NONAME" .  Why "NONAME"... I don't know :) Some people  give he name WALL-E , but they wrong... It's … Read more

For now its almost done! My selfbulid CNC-Mill is ready to use. It all started during my x-mas holidays when I found Tinheads Valkyrie here on LMR. I had the idea … Read more

  A friend of mine and I are working on a project called "TinyG".  This project is a motion control system for stepper motors  (up to 254) at a time.  However … Read more

Read more

Hi guys....     Finally today arrived the last order for this robot... the wheels and the caster....   I took me 2 night of CAD-ing...   Read more

hello to all this is my first robot ,it s a simple robot to start my work he searches environment and detects obstacles(with micro switches)and finds the best … Read more