Parallax Ping)))

Our goal is to learn about robotics and programming as part of our homeschool lessons.  We decided to use kits to help get us up and running faster and get into … Read more

This is my first trackbot project. Its very basic right now... Read more

Here is some information on Zapp Prop Bot-1.X It is controlled by a Propeller Robot Controller Board Kit V1.02 by Wulfden. Read more

this is the up grade. Parts, Arduino uno PING)))3 x Sharp IR FlyCamOne v2 by eco 22-1294 1x Press Me message recorder  (NEW! 12/9/2011)Servo 4x 7805cv 5v … Read more

This is my 1st robot, i opted to go for the start here but change the Sharp for parralax ping))) ultrasonic. Scraped the code from various sorces (none of it is … Read more

     This is my second robot, my first was a I.P. controlled robot for my senior project in Electrical Engineering. This one I am doing for fun. I am trying to … Read more

I started building the Mr General kit this morning. Cant continue much further until the 3.3v regulator arrives. Waiting on a free sample of a MCP 3208 from … Read more

This is my first cut at programming a robot.  Puting the kit together was pretty easy after dealing with some shipping damage.  Then after some experimentation I … Read more

*///This Robot is a work in Progress\\\\*  I will upload a video of it once I complete the robot. Read more

Here goes 812-R8. I really wanted to get something posted as this bot has been sitting here for almost a week now. More details and photos will be added later … Read more

My parts are alive again. my bot recycling is in force. started out with raduinos treaded base and a pair of servos from blocky.some 5min epoxy and some random … Read more

This is AR-DEE, my first approach to  robotics and electronics in generall. It uses a Arduino and a Parallax Ping)) to avoid … Read more

This is my first robot (actually I made one a few weeks ago that was not so good...just so I could see something moving--instead of just lighting up LEDs and such). … Read more

This robot is based on the Tyco Rebound chasis. It is controleed by a Basic Stamp 2e. The motors are controlled by a L298 Compact Motor Driver Kit.  It uses a … Read more

RETIRED(for now) i plan on rebuilding him some day. his parts are now on my other bot. look out for that and my airsoft bot     update: just ordered 4 futaba … Read more

Lieutenant Dan is my entry in a junkbot contest. The "sponsor" wanted humanoids. I think Lt. Dan qualifies as a humanoid, even though only the top half of one. Read more

Hi,   Read more

"My First Robot" - BERNT EDIT: 2009-02-02 - BERNT IS ALIVE!  New video added, I know the performance sucks and all that...but i just wanted to show it. … Read more

Second-hand BoeBot With the whole 2K eeprom and the luxury 13 words RAM Fitted with the Ping, a compass, the quad QTI kit (2 used as kindof wheels encoders) + all … Read more

Ahoy! what I am trying to do is make a mobile platform with a little breadboard on it so that I can try different projects. Underneath I have a l298 motor driver … Read more

This is my Roverbot.  He is a very simple robot, all he does is basically what the "Start Here" robot does, but with a casca tankbot chassis, an arduino, and a … Read more

Final Update: Welp drumbot was interesting, I got him to the point where he could approach, align, and drum on objects, but shortly thereaftrer the gears stripped … Read more

The 2 images below was my first attempt at a robot using fritsl's guide. After my first attempt i felt ashamed of how flimsy and goofy the robot looked.  So I … Read more

  It turns out that the treads I was using are way to heavy/bulky so I decided to just scrap the tankbot idea for now and go with a simpler bot  I am using two … Read more