Let's Make Robots!

PCB etching DIY circuit board

Six months ago I bought my first Arduino.  Bought it at the Shack.  I'd never worked with electronics, but I had to replace a momentary switch on my computer and … Read more

Boards & Boards (to get you bored) -- a log of homebrewed circuits coming to life...

I decided to make a blog to serve as a log for the boards I design and/or produce... well mostly because I can. So here it goes.

NOTE: Older boards at the bottom, newer at the top. So do bottom-up read if you're after a chronological perspective.


05 - Practice makes perfect (eventually) OR the h-bridgemania

PCB CNC Mill: Clamping makes a difference

This might be useful to anyone else here with a DIY CNC who does PCB milling: http://blog.holyscraphotsprings.com/2011/05/good-circuit-boards-require-good.html

I've had a really tough time figuring out how to clamp my PCBs: my boards often look like the "bad PCB" here: http://www.flickr.com/photos/11461247@N02/5697373918/

PCB - The Making of Blaster Shark (Sumo)

The details of why I picked what parts I picked are covered in the Design blog.  What I am about to describe here is the tools and process I go through to design and etch my own PCB.

Circuit Design