Let's Make Robots!


Can't get my HXT900 servo to move


Trying to get my HXT900 to work on my test board but it just screams. I'm using a PICAXE 08M pins 0,1,2. there is a jumper that i set to downlaod and then to use as low for servo. orange cable to pin 0, red cable to pin1 and brown cable to pin2 The following is my code. Anyone out there ever came across this . Note I had it working once on my 18M



low 0

high 1

This is a quadruped robot in prototyping using seeeduino mega, 12 HXT900 hobby micro servos, 3.7V lipo battery. Materials used are all plywood secured with small … Read more