Let's Make Robots!
4P is a small quadruped robot designed to teach more complex mobility functions with the use of inverse kinematics and stabilization algorithms. Read more
Generates a graphic based on a csv string from the serial port
Once in a while we need to visualize the data coming out of sensors or functions we have in the microcontrollers.To do that normally we send the data through the … Read more
I designed and built this vehicle as a senior project. The vehicle is loosely based on the army MarcBot, one of the first sugv's, but with some upgrades specially … Read more
stabilizes a camera using an accelerometer and an attiny85
As a small proof of concept (stuborness about attiny tiny core capabilities) I made a small camera stabilizer using a Attiny85 and LSM303DLHC breakout board.  To … Read more

Custom low-cost solder paste stencils (Europe)

We are happy to announce our new service at DroneTech, solder paste stencils.

These stencils are made in PET material which makes them very cost effective for small batch production runs and prototyping.

Solder paste stencils allow to quick and accuratelly apply paste to the pcb's for surface mount devices soldering.

DTFusion - Dual channel servo 180º travel extender

 

This servo travel extender was designed for pan/tilt systems and more specifically for FPV. It was designed to meet the need of RC entusiasts that want a bigger view angle without buying expensive digital servos. Since is dual channel we only need one per each pan/tilt system.

Price: $23 USD
This servo travel extender was designed for pan/tilt systems and more specifically for FPV. It was designed to meet the need of RC entusiasts that want a bigger … Read more
Controls a small RC car via PC with image processing
Small project to control an RC car via pc. I've placed a small RF pinhole camera in the car so I could be used for manual driving and for image processing. Here are … Read more

Pic simulation and debugging

I've had a university assigment using a pic and had a bit of a trouble to find an easy way to program and simulate for the 16F628A.

So I made this small video tutorial using Mikrobasic, Proteus and MPLAB.
 
You'll need this:

MikroBasic - http://www.mikroe.com/eng/products/view/9/mikrobasic-pro-for-pic/

ISIS - http://www.labcenter.com/download/prodemo_download.cfm