Let's Make Robots!

Chris the Carpenter Please read

So after doing the things you suggested the other day I have a little better understanding. My teacher and I did alittle research and came across a code you wrote  and I had some questions. it has to pertain to the rocketbot app which you wrote it for. I uploaded that code to my bot to see if i could get the app to work I was able to get the data qualifier bit to receive but the data byte shows up a block please help me out. This is the code you wrote but it doesnt work so maybe I'm thinking i have the wires all hooked up wrong on mine.

Help with programing ASAP

I have the dagu rover 5 chassis with 2 encoders and the dagu 4 channel motor controller and the redback spider atmega 1280. I purchased the rocketbot app for android to control my robot. I was able to hit the forward button and make my bot move forward but that is it it wont stop it wont move left or right or even  please help asap I have a week and 2 days before my capstone for ITT Tech here is what i have so far for the code. I really just need it to be real basic.

hooking up the wires

I recently purchased the  dagu red back spider and the Dagu 4 Channel 5-12V, 2A Brushed DC Motor Controller. I also puchased the rover 5 with 2 motors. I want to hook everything up so it is correct. I have a basic lay out here http://letsmakerobots.com/node/27513 but want to know more. If I follow the diagram on this link I posted it just seems like it is a portial hook up. Ok the vcc and ground from the two moters would go the the blue board with is the motor comtroller but where?