Let's Make Robots!

Need to setup TIMER3 on Mega to higher frenquency PWM

I need to set TIMER3, controlling pins 2 and 3 on an Arduino Mega to either fast PWM mode (acceptable) or faster (higher frequency)(preferable).

I use this PWM to control an audio signal through a Silonex light sensitive resistor/LED unint and some audio contamination can be heard because of the speed at which the Silonex reacts. I used TIMER0 in tests with a prescaler of 1 and it works OK. But TIMER1 is "fast" PWM and TIMER3 is "phase correct".