Let's Make Robots!


Combining multiple servos together.

Does anyone have experience with using a wiring harness to supply servos with power? I basically want to cut all my servo leads and run a single set of power and ground lines to daisy chain all the servos in each limb of a biped (6 per leg, 3 per arm) together.

       Hello LMR, this is Penny the 3 servo hexapod. Penny is not just a very cheap way to build a hexapod but a very cheap way to build a robot, period. I … Read more
    This is WobbleBot, my attempt at a two-wheeled self-balancing robot. Using Pololus' Baby Orangutan-B 328 to control the micro gearmotors. Although the bot is … Read more

ATtiny servo control


After a brief discussion with fellow LMR member Maxhirez, about his Hedwig robot,
it seems as though there isn't much support for servos in the ATtiny family of
microcontrollers. After fighting with the 8-bit servo library I found HERE that was
supposed to make it as easy as a standard Arduino to add servos to an ATTiny project,

Sugru, New bot building material.

I found this on YouTube and thought it was a pretty neat way to make some strong, flexible, temperature resistant robot parts. All the info is in the video, but basically it is like polymorph, only silicon based. Enjoy.