Let's Make Robots!

[SOLVED] Burning bootloader to Arduino Nano from Dagu Red Spider via circuting

So I recently got an arduino nano, but it came without a bootloader. I am trying to burn the bootloader by using the only other board I have, which is a Dagu Red Spider. By looking at the schematics, I figured out MSIO was on pin 22, MOSI was on pin 21, SCK on pin 20, and SS on 19. I connected those to the Nano's pins 12, 11, 13, and reset, respectively. Unfortunately, it still gives me "avrdude: stk500_getsync(): not in sync: resp=0x00" error.

Can anyone offer me any suggestions?