Let's Make Robots!

[ SOLVED ] Crystal oscillator for PIC

Hello folks, I'm having lot of problems with a PIC16F876A.

When I powered my newly built robot for the first time, the first thing I checked with my oscilloscope was the clock source, and found out that the crystal was not oscillating. Then I put my pic on the breadboard and started testing.

Hello Folks. I want to share with all what happened to me, why I was being wrong and what I learned:   The preface: I'm making a police-style led flasher for an RC … Read more

Universal AVR ISP

Hi to all, I'm quite new to AVR MCUs and I have the chips (ATmega32 16PU), but no programmer.

I'm obsessed by the word "universal", because I don't wanna buy a programmer every time I'm working with a different chip, so the question is: which is the really universal ISP for AVRs, possibly with USB connector?

Thx in advance ;-)

Gives push button the typical ON/OFF toggle function.
Hi everyone, this is my first walkthrough, hope You'll enjoy ;-) ___Where the story begins___ I wanted to use a PC PSU as power supply for my works and I was … Read more

PIC Is TTL or CMOS?

Hi all, I have question about PIC16F877A... I need to interface it with other ICs like 7segment drivers,
and I have to choose between TTL and CMOS technology. But I can't find out on the datasheet if the mcu is in ttl or cmos one.
The final question is: have I to consider the 16f877a a ttl or a cmos IC?
Many THX in advance ;-)

Comunication between two MCUs

Hi all, this is the question: which is the fastest method to exchange informations between two 8-bit mcus?

I'm developing a tacho unit for a friend's go-kart. As long as I'm planning to use multiplexed 7-segment displays, I want to dedicate one micro to the multiplexing job and the other one will perform measurements and other operations ( the tacho is only a part of the things I want put on the kart )... maybe I'll use two PIC16f877a.

To have all finally working, I nedd them to comunicate, with the one telling the speed to the other. My ideas were:

It will roam in the environment looking all around itself.
Using a
Hi everyone. Like many other people, I get inspired a lot from movie "Wall-E" so I decided to make a clone of it. This is my first attempt to make a Wall-E similar … Read more

The best way to manage 2A motors.

Hi all, i'm wondering how i can control a motor with 2A current flow at 6Volts. I'm hacking a toy and the motors that make it to move requires that current... so i can't proceed to my plan A: the L293DNE, because it manages a maximum of 1.4A.

I don't know if exist a similar chip but wiht a higer current limit.

If You have ideas for that... PLEASE HELP ME!

Operational Amplifiers DataSheets

Hi to ALL, does anyone know what's the INPUT BIAS CURRENT on operational amplifiers datasheets. What's BIAS ???

Thx you very much for the interest for a noob like me.

Filip

It manipulates objects (test movements for now).
Using a
Well, I'm restoring an old robot, because I'm now able to use Basic Stamps. This robot is a Parallax & DeAgostini projects which came out from newsagent's, so … Read more