Let's Make Robots!

Hack your servo v 2.00 – Add 10-bit incremental / absolute encoder feedback to your hobby servo

Modified continuous-rotation servos are used extensively by roboticists due to their small form-factor, enclosed motor-gearbox, ease of mounting and high-availability. Some users keep the original drive electronics and the potentiometer feedback element but this approach allows for limited position control and velocity control / profiling. Others tend to remove them and use external control/drive boards and custom-made encoders. Ideally one would prefer to have the feedback element and the new drive electronics enclosed inside the servo.

Hack your servo V1.00 - Turn your servo into a powerful linear actuator

Provided you have the tools and the servo you can built this for under a couple of bucks. The actuator extends with a rate of about 50mm/min. It is rather slow but very powerful. Get the full story:



Comments welcome!

MTR - A planetary surface exploration rover

My PhD work, from concept to implementation ;)