Let's Make Robots!

All LMR robots, sorted by recent activity

wrench_orange.png  Submit Robot project

See most collected robots


Walk forword,back.left,right,balance one leg, up-down 1 or 2 leg,Turn right-left,Control With Bluetooth
Using a
My new Biped Robot "Red-Dragon V3"   what's new -Remove the camera Read more
Autonomous Rover - using Neato-XV11 LIDAR plus sharp infrared
It's been a while since I did any "robot" work.  I've been rather absorbed in my 3D Printer firmware. Read more
Walk forword,back.left,right,balance one leg, up-down 1 or 2 leg,Turn right-left,camera
Using a
Upgrade 10/9/2001 Hello again I've made some additions to the Red-Dragon in order to make a humanoid robot. Read more
Hi all, This is my first laser cut project. Used 3mm & 6mm MDF board and one 8mm wooden stick. Scotch double sided type was used to bond inbetween the servo and … Read more
Goes to the brightest light source
Using a
Ok, that is something what sits on my desk for a while and never got finished. Inspired by Yahmez and his The MicRObot Challenge and also one of my Chinese … Read more
Navigate around commanded by phone or autonomous. Can overcome obstacles higher than the tracks
We create robots that sometimes move around but, what happend when those robots find an obstacle? If the obstacle is small the robot can pass over it, with a … Read more
Driving around, avoid obstacles and edges. Will have some more functionality but that's still to be determined.
Using a
UPDATE April 29, 2014: As for request of fello LMRians I've put those motors in the shopping section of Letsmakerobots: Micro Gear Motor UPDATE April 21 2014: Sadly … Read more
Hello Guys, I wanted to build a controller that I could use on a robot that I'm building, so I started my xbee teensy controller. I got inspired by a thread here on … Read more
4 axis robot arm with a small gripper and teach function. (In fact: it is a 3 axis robot) This robot can follow. This robot can learn. And this robot can repeat … Read more
Well I have finally made some time this winter to return to my lawn mower project.. This has plagued me for a few years, trying to figure out the buried wire … Read more
A winning home-made robot for the Ketchup House competition at the Robotic Day 2016 in Prague.
Using a
After having read your amazing robots for 2 months, I decided to start building my own one. I would like my first robot could "walk" instead of wheels. Of course, … Read more
For the sake of it, I wanted to see if I could make a really simple biped - and this is what I came up with :) I thought it was really fun to do, much more than … Read more
explore the world via camera, Programmable, Through narrow places easily, battle with other robots
Using a
Since this Project was transferred from the project: Xpider--the smallest smart robot spider (Stop Updating)    I will describe the project infomation simplely. Read more
Teacher needs to convert an animatronic toy into a remote controlled one -- all the motors are there. If you can add any movements, that's a plus. Right now, I … Read more
I have designed and manufactured these grippers with a 3D printer.  The main features of these robotic grippers are : Read more
The development team RoboticsBY demonstrates how to use MATLAB and Simulink Support Packages for Arduino, Raspberry Pi, and More Low-Cost Hardware for Learning the … Read more
Apologies to K120 for his outstanding design that I mangled or to anyone else who may be offended. (Which would be most people...) Read more
     MDi #4: Mech-Dickel interactive number 4.      I started this project in 2015 (october/november), wanting to make a medium-sized robot. Functionally … Read more
Talking,walking forward &left & right & backward,self navigating,playing,tail shaking, getting angry for caress ,eye acts.
  Firstly ,my special thanks for who chopstick juniours maker lumi and facial led matrix maker dickel. Robot chassis uniformity and cute image of chopsticks cause … Read more
Robotic ball has been an ongoing project for a long period of time now. The simplicity yet excellent functionality marks it apart from the common robots seen these … Read more
Line following for DTU Robocup
Using a
Out of pure frustration with the fact that my LEGO MINDSTORMS NXT based robot, that was supposed to participate in DTU robocup, turned out to be crap, I thought … Read more
Greetings, Programs!     My son is into robotics, and wanted to share his latest creation with the group - meet "Volt".  This is version 2 of his … Read more
A winning robot of the Czech round of the RoboRAVE 2016 Junior competition – Ball transport with automatic loading
Using a
Béda 5 is a robot, with which our team HaHaHa Robotics ( Read more
creep around, avoid obstacles, autonomous and remote controlled
So this is my first robot ever.  Why another chopstick robot? Well, simple answer: When i first started to look into making any kind of robot the price for a kit … Read more
Navigate around via ultrasound, line follower, light seeker
Using a
Hi guys, Read more
Made to experiment with visual navigation and object manipulation
Using a
  MILO is the successor build to ScoutBot 1402, and re-uses many of the components from that robot.  Since he is the second attempt at a large robot, there is a … Read more
This is my new project Squidscout.It is a 6wd rover with rocker suspension (Rocker-Bogie) Read more
This is my first robot attempt using Arduino uno it is almost finished and I have a code but there might be something wrong with the wiring if anyone has any … Read more