Let's Make Robots!

All LMR robots, sorted by recent activity - Submit your own robots - See most collected robots here


Just walks forward for now, but plan is that he'll avoid obstacles, and perform entertaining routines.
Using a
This is very much in progress. I'm building on what I learnt from Duckling to design a more refined "rocking-style" biped. 2013-11-17 Construction is pretty much … Read more
Videos: http://www.youtube.com/watch?v=Pbb9GOWaL4g and http://www.youtube.com/watch?v=mPakG8p3MHE Update: Added schematic for the vacuum system Code word were: … Read more
obstacle avoidance, bluetooth
Using a
This is my ice cream tub robot "Leslie". I named her after my mom because my mom is always there for me and she always encourages me to build robots and do what i … Read more
Navigates via ultrasound/bumper switches, locates (hopefully human) motion via PIR Sensors, navigates to that motion and offers the source a drink
Using a
Sorry about the bump-all I've done is move him out of WIP status in accordance with FritsL's new rule ;-) He's getting a serious upgrade in functionality and a … Read more
Hello! this is probably my first barebones(I think)....it should actually use a pcb, but there was a problem when I printed the circuit board, the circuit's too … Read more
remote control, map path, knows position, avoid obstacles
Using a
Update 14 November (2) This is a screenshot from the plotted path with the adjustments: Notice that I have followed a similar path as the path plotted in my … Read more
I have a new walker in progress. A part 2, if you will, of Sintra-sticks. This time, I am using smaller components, more servos, and hoping for more luck on … Read more
Right now, basic obstacle avoidance and plays music.
Using a
 This robotic platform is still a work in progress.  I wanted to build a medium to large size robot for a long time!  after joining a robotics club and with the … Read more
Inspired by the Baxter robot from Rethink Robotics, I noticed Adafruit started selling analog feedback servos. This will allow people to train a robotic arm with … Read more
Object avoidance, moving indoors
Using a
Castro III Castro III is currently a simple obstacle avoiding robot. It's built on toy car chassis. Equipment used: Freeduino 1.22, two DC motors, Pololu DRV8833 … Read more
This is the Butterbot. I started out wanting to make a robot that could butter my french toast. Then I got the idea to make it a 1" cube robot for Nanosumo at … Read more
This is my first light seeking robot, "dronzy". I know the name is bit weird but i kinda like it. So first of all my robot has for a brain an arduino uno r3, wich … Read more
Multi-purpose robotic platform
Using a
This is my tracked multi-purpose robot. It is powered by two DC motors and controlled via RF link (range 1km LOS) by a usb controller plugged into a custom … Read more
This is my second puppy robot and the first to use a QuadBot kit. The robot is quite simple, just a pan / tilt kit mounted on a QuadBot chassis with DAGU's new … Read more
Maps enviroment, explores with arm, falls over.
Using a
Sun 7th Dec 2008 Had a few setbacks with the old NiMh battery pack dying and the new LiPo battery packs not fitting where I hoped. Compare the old photo to the new … Read more
Seek light or dark (Randomly) avoid obstacles with ultrasound
Using a
I have been amazed and inspired by LMR to make robots. This is my third robot, but the first I have attempted to document on LMR. My first two were not especially … Read more
Jarvis is a entertainment android and also serves as my personal computer
Using a
Jarvis is a project inspired in part by Jarvis the AI that belongs to Tony Stark in the movie and comic book series IRON MAN. This is my first real android robot … Read more
Not sure if a quadrotor count as a robot, but that's somethting i have been working on and I would like to share with you guys. There is quite a lot of stuff to … Read more
One thing i have always wanted to do (before arduino even existed) was get an RC tank! i always wanted to build one but didnt have the money to buy new hardware. If … Read more
This project is my first foray into robotics and electronics for that matter. My goal is to end up with a platform for AI experiementation. I plan to add GPS and a … Read more
just another light seeking robot  41mm wheel base  iphone for size comparison 14cm x 8cm x 7cm   parts list Read more
I bought a pair of PIR detectors 'tother week, however have been pretty busy recently. This afternoon i got them on board! So the PIR sensors are mounted on a box, … Read more
This is a first person shooter avatar, you control is remotly and shoot at your friends... well hopefully your friends robots :)
Using a
This is the second outdoor fun entry level mech warrior. This is following begginer level competition rules from mech warriors.com which is a competition ran by … Read more
The Beer Butler Robot Stays on your base and acts as a beverage cooler and will undock and bring you a drink on command then return home to charge and cool drinks
Using a
This is my Beer Butler project. It could bring you any beverage even bottled wine :) The base is a hacked Roomba Discovery 400 series and controlled by a EZ-Robot … Read more
This project calls for the design of an Ardinuo Doodle Bot. This report includes the physical design and assembly along with Cero designs and assembly. Upon … Read more
Avoid objects, move around random, make someone smile
I was in Amsterdam for New years eve and ended up buying myself a coffee cup that came in a cool box. After I got home I put away my new cup and then thought about … Read more
Squeegee Project goal is to Spray cleaning solution and mop my wood and tile floors. It is autonomous.
Using a
Heavily customized Omnibot Jr from Radioshack.  Its an 80s model.  I have a thing for the old robots. They have character. :) Aprox costs: Omnibot Jr $40 Ez Robot … Read more