Let's Make Robots!

All LMR robots, sorted by recent activity - Submit your own robots - See most collected robots here


walk forward
Using a
This walker robot uses two HS-55 servos to walk and it runs on an arduino uno. It also has no sensors. Hope you enjoy! Read more
One of my hobbies is Ventriloquism so it seemed natural to combine puppetry with robotics. Our webpage has complete details of Frank including all source code. The … Read more
Seeks light a little jump at a time
Using a
File this one under "stuff everyone else has done so I guess I better do it too"  I've been wanting to put together a BEAM photopopper for awhile -- I pulled most … Read more
Modifications were made to a standard 3pi robot to give it most of the capabilities of the RobotBASIC simulated robot (bumper sensors, IR proximity sensors, line … Read more
Nothing new here. Just my new christmas/birthday present. The main reason why I posted this video here is to get advice, comments or suggestions from everyone … Read more
A talking, animatronic table decoration for Thanksgiving, 2011. Decorated and voiced with help from my 2 year old daughter. The turkey randomly looks around, flaps … Read more
Moves around via commands from PC, Humanoid is animated, it can move its head & arms. Can display messages on its 4 x 20 LCD.
Using a
ZappBot 3 - Tracked Humanoid Torso Robot. The robot is 11" Wide, 12" Deep and 21" Tall. It is controlled by a Propeller Chip P8X32A-D40 and a Digi XBee 1 mW Radio … Read more
Move and Obstacle avoidance
Using a
So, I have been kind of dabbling with this thing for maybe 6 months (idea to conception) and well I don’t know what I’m doing wrong but it just doesn’t work … Read more
Line follower
Using a
The design of the base is terribly flawed, but everything else works well :) The base is much too long, and there are two sets of batteries at each end. This has … Read more
Update for http://letsmakerobots.com/node/25837 Stops and reverses for a millisecond when it comes within 30 cm of an object for effective braking when it picks up … Read more
I bought these mecanum wheels from sparkfun and its manufacture by FingerTech Robotics. When I got them it came with four set of wheels. One pack is missing all … Read more
The other day was talking to a friend who is animageek. She was asking: "Why don't you build a Tachikoma? It looks like doable!". Man! That's way far than what I … Read more
Please dont laugh this little guy off the planet. He was a very old robot kit Called Mr. Technoman I'll upload a picture of the box later for fun. The old robot was … Read more
walk
Using a
This is my first robot. I build it in a few hours and it it most mechanic. The bot is made using two servo's and a few pieces of wood and plastic.   Read more
Telepresence, obstacle avoidance, line following and can be remote controlled using a kinect
This is a bot that we’ve developed for a event called SAPO Codebits V Read more
Hello, my line follower robot: Components: 2 x Pololu 10:1 Micro metal gearmotor HP. Baby Orangutan B-328. QTR-8A Reflectance sensor array. Pololu wheel 32x7 … Read more
run around, avoid obstacles after bashing into them
Using a
This is Mr Shark Fin Soup. Hes a Frits Basic Robot but with a deadly twist. I used the Morphibians Land Shark RC car as the base for this bot. These are great … Read more
navigate around, make sounds, communicate with other 'bots, flash lights
Using a
Investigates the Festive environment with a Festive Twist
Using a
I present to you "Miranda" , a laser scanning Robotic system using a Wii-Mote Camera and Festive Reflective Xmas Bauble. My previous "Halo" Experiments have been … Read more
delivers coffee to my lecturer, from the staffroom
Coffee Delivering Robot - Delivers coffee between two fixed points: My lecturers office and the staff room (which are on the same floor). Read more
20/11/11 This is my new autonomous line following bot starting to take shape and a much more slicker design than my last bot attempt. It's made out of clear … Read more
***Update: Fixed some spelling*** ***Update: Video added***   Read more
3D printing
Using a
Recently I ordered a MakerBot Thing-O-Matic. On Thursday I've got mail: "Your order # ...... has been Complete - Packed and Shipped." Deep breath. From experience I … Read more
Finds the hidden racing track in every room.. and races it!
Using a
This is updated, reason is here   A video in better quality than YouTube & Google is here How to make Robot Wall Racers yourself, see here Read more
More info here: http://www.pablogindel.com/2009/08/novedades-de-samsa/ Read more
See project documentation here: http://www.pablogindel.com/trabajos/samsa-ii-2010/ http://www.slideshare.net/pablogindel/presentacin-samsa-ii Read more