Let's Make Robots!

All LMR robots, sorted by recent activity - Submit your own robots - See most collected robots here


This represents my first attempt at any robot. Not the happy ending that I expected. Even after two tries still nothing. I followed the tutorial found here :--> … Read more
here is a pic of my robot, it's based on a DF Robot RoMeo board with a parallax PING ))) sensor. basically it just cruises around and when the ping picks up an … Read more
This is a Hexapod Robot ive built from scractch . All parts are laser cut from 6mm acrylic It will be available as a kit form In the verry near future. The project … Read more
Ultrasound navigation, reacts on nearfield bodyheat, detects light
Using a
This is my first autonomous 4WDBOT on a DfRobot Base.I try to keep all mountings as clear and functional as possible - no decoration parts. Update: After some … Read more
The Robotic Tank you see here was capable of speeds approaching 10MPH With myself on it. Powered by 2 250W electric Scooter motors, it was a very large project. The … Read more
     During my week of final exams I had almost nothing to do after my half-days of school, then I had a revelation, why don't I make a robotic arm. The fact of … Read more
Drives over most stuff, occasionally flips over.
Using a
Mr Mountain Monster (MMM) was originally named Mr Suspense because his main modification to the Mr Basic kit from DAGU is the suspension and flexible drive system. … Read more
Looks for brass flies to eat
Using a
This is Venux, my steampunk-inspired brass fly trap. There's more information on my Build a brassier flytrap blog. One flower is complete, with touch sensor and … Read more
Attracts FireFlies into your garden
Using a
This is robotic Firefly based on a picaxe 08 using UltraViolet leds as sensors. Flight School. Here you can see her Big Flattering Stereo eyes, they are simply … Read more
This is a pet toy robot, not a pet robot like Aibo But children like it more than pets do    this is second prototype of my Pettoybot. First one was on $10 toy RC … Read more
Moves around avoiding things with the ultrasonic antennea
Using a
This is my first robot, his name is 'bugbot'.    Parts list:   Picaxe 28a started pack Tamiya dual motor gearbox - Jaycar Read more
Navigate around while avoiding obstacles with ultrasound, infrared light and air pressure based bumper sensors.
Using a
Computer Numerical Control. Process job request to mill oblects via 3 axis'.
Using a
Built based on www.buildyourcnc.com, in conjunction with the companion book.   I know it's been done before, but I wanted it myself. I have completed about 98% of … Read more

AGV

So this is my latest robot that I am working on. It consists of an arduino uno, 2 servos from the car and a Memsic 2125. I bought the memsic 2125 form radio shack. … Read more
To start, I'd like to say this is my first robot, but, since I had electronic- experience, and so many people have done the SHR, and I had a good idea, B.I.L. was … Read more
Hi, I started with a clone from OddBots Chopsticks spider robot. I have used 8x12Kg servos and 16x6,2Kg Servos from TowerPro Servos I also buyed the spider … Read more
This is my first project and it will most likely take me an inordinate amount of time due to the fact that i'm in school at the moment but i will go as fast as … Read more
After a long period of inactivity after the failure to get my Atom-R1 project completed (due to it being too heavy for the largest motors I could install in its … Read more
Navigate around with ultrasound
Using a
My first robot is “Geronimo” and it is a simple autonomous robot with an ultrasonic sensor for obstacles avoindance. This robot can be built by a newbie of … Read more
This is Flippy, he was built to win the Cross the gap challenge but I couldn't complete him in time. He is the second (and third) implementation of my third design … Read more
2 DIY IR proximity sensors.1 Light dependent resistor 1 l293d motor driver1 atmega328 with arduino bootloadersmall speakertamiya gearbox + tank treads bump switch … Read more
JORGEroamer is a modified A-Robot from Arrick Robotics. A sturdy and practical platform, this tri-wheel robot affords a unique chassis and steering system. The … Read more
Navigate around via sharp IR
Using a
This is my first robot...a simple SHR. I connected a 7 segments LED mounted on a small breadboard. the LED display "G" when its going forward and "S" when it stops … Read more
Basic robot for testing code and sensors
Using a
Generic experimental Arduino Robot          I put this together one or two years ago and have been fiddling with it ever since. The version in the picture … Read more
This is FLAMEbot. He's a heat seeker. Draw the shades and darken the room. Light a butane lighter and FLAMEbot will follow the heat/light source.  Hold the … Read more
                                                                              * --------------------- June 17, 2011 … Read more
navigates around using IR and tracks motion
Using a
INTRO I haven´t been tinkering with bots long. As a matter of fact, I am rather childish, in the sense that I fall desperately in love with something -bots right … Read more
I have started my work on my second robot - Wi-Rover. the idea as i said while concluding my first robot is to have one that can roam around on itself avoiding … Read more