Let's Make Robots!

All LMR robots, sorted by recent activity - Submit your own robots - See most collected robots here


wifi remote control vie the net
Using a
I was looking at the sit when i saw the need for the internet controlled robot. coinsidently i had my spykee sitting around doing nothing. only one problem. i have … Read more
hello , this is my first robot , it is intended to be a long term project  kinda like CtC s WALTER , so far i only have the motors and motor drivers . Read more
This robot is my first robot. :)    cny70 sensors.    Cny70 driver.   Microcontroller circuits.   optocoupler circuit.   L6203 motor driver. Read more
Run 2 Motors, Fwd and Rev with PWM Control
***Update*** Well, it seems I might have smoked something. I am in the process of testing the motor driver, with a load, and using 2 motors. While my "B" channel … Read more
Manoeuvrabot is intended to be highly manoruvrable - hence it has four omni-wheels which can each be driven independently from a 4 channel motor controller. … Read more
navigate and chat over IR
Using a
This is my first project that hasnt been a kit, and i wanted to do it from scratch. its not quite a sarm in the sense that ive only built one robot, and that it … Read more
In 2008 I have built a simple balancing robot, mostly a copy from a balancing robot made using a Basic Stamp 2 SX, found on the Parallax Forum, that I have adapted … Read more
Is it wrong to give your robot a little head? Or a big head for that matter? Gone are the days of my old, clunky teaching pendant for Walter's head. I have coded a … Read more
Inter/Intranet controlled robot able to send video/voice/email and play with my kid from the office
Using a
Hi all,  I'm from The Netherlands and have a nice little girl that wants me to build a robot. Well, easier said then done so far. Since I'm an IT consultant I … Read more
Well folks, Here is some of the first tests of Walter's mapping system. There are 2 videos, one showing a mapping run and the data, the other showing the hardware I … Read more
Navigates around avoiding obstacle or bluetooth controlled.
Using a
Hi LMRs again            I've started designing a new robot which will be semi-autonomous. I got a set of Tamiya 70100 tank treads. Quality is good for … Read more
Navigate by ultrasonic sensors, track targets with moving turret via non-contact temp sensor, "shoot" with LEDs in the guns
Using a
A remote-controlled Baneblade for a HSC Software Design and development project, already done by BobPanda, thanks for the inspiration, but now with a little more … Read more
TapeBot was built following the "build your first robot" tutorial. The body is a discarded backup tape box from one of my servers at work. The processor is PicAxe, … Read more
Hai guys, This is my new look 5 axis robotic arm. If you have read my previous post, in LMR at ----->http://letsmakerobots.com/node/10708 .This new version use … Read more
[Need help with Hardware (Encoders), see last Picture]  Hi There, although I just registred, I've been visiting this Site for a while. Now that I started my own … Read more
Autonomously navigate, find objects, sort and store them.
Using a
This was my first robot since the days of Lego Mindstorms 1.0. It was built as my senior design project. It follows all the rules to the IEEE SouthEastCon 2009 … Read more
My first robotics project and introduction into the world of electronics in general. I was going to grab the Parallax BOE Bot but while doing my research I ran … Read more
Sterylite6000 is a large and somewhat unusual robot.  Originally it was designed to use only six servos.  This worked resonably well, but did not get good ground … Read more
Avoid Obstacles and find free space
Using a
While waiting for parts to come in for SAGAR (my current robot, to be posted soon), I decided I’d kill three birds with one stone. I wanted to adapt my Irobot … Read more
What every tech-nut dreams of; build your own robot! Finally I built my obstacle avoiding rover robot using; Read more
Stays "alive" by navigating towards bright light sources
Updated 28/10/2009 Added a video of the bot in motion. Description This is my first vibrobot. I've wanted to create a phototropic BEAM vibrobot for a long time … Read more
Navigates around via ultrasound, reacts on brightness, emits blue cold light by chemiluminescence
Using a
This project shall be another step to combine robotics and chemistry. Mr. Firefly is able to emits blue cold light by chemiluminescence. For this attempt, luminol … Read more
hello all,i am new to bots making.this one is the first. part list: 2*28RPM gear motor, 2*bike spoke as leg, a piece of sheet iron as body to fix the … Read more
Gives other players, soldiers, a new perspective.
(Dont forget to view the attachment photos) Ever since I saw this system on the military channel I thought it would be cool to make a miniture version for airsoft. … Read more
    In my thesis I am creating a development board for use in the University Labs. This same idea is put here, to develop a mini-version, for purposes of … Read more
light seeking,chaos,against obstacle
Using a
the beam ant v1 is a bare bone version.I use very sensitive photo diodes to make the bridge.it show some unbelievable behaviors. the v2 is a heavy duty … Read more