Let's Make Robots!

All LMR robots, sorted by recent activity - Submit your own robots - See most collected robots here


  Всем привет ! Недавно создал статью на сайте http://rassionrobots.ucoz.ru/news/svetofil_na_batarejke/2010-07-02-176 о … Read more
Follows a line and avoid obstacles, Make sound with a piezo speaker
Using a
This is my entry for the DAGU "Beginners Robot Chassis Challenge". It is prelimary named Pacman, but the name maybe change in the future. Pacman was my first idea, … Read more
Hey guys, (Full disclosure) I work for Trossen Robotics, and this is a prototype for an upcoming product we're making. But- I think it's a pretty cool bot, so I … Read more
Hi guys! Goggling around searching for information on arduinos and robots, I found this fantastic website. After spending hours reading your projects I decided to … Read more
This one is a copy of the floid robot but made with aluminium . for more details you can see on the original floid robot post . I can only provide you with some … Read more
This is BRC, a line following and obstacles avoiding robot made for the Beginners robot chassis challenge.   Parts used: Read more
My first ever robot, built from parts freely available from most Electronics shops. Built around an Arduino Mega 1280, two 100:1 3V geared motors from MFA, two 3 AA … Read more
Here is my second robot based on Picaxe 28X1 board (Start Here format), designed on a chassis that was actually an air duct from the cooling system of an old … Read more
Bounces off walls
Thanks to the LMR society I was asked to do a review on one of Solarbotics robots. It's a little critter called The BeetleBot. So hold tight, here it comes. … Read more
Follows the light from a lighter
Using a
Hi, My name is Zuzu, I live in my masters pocket and usually I sleep at day, but at night, when all the lights goes out, I will wake up and I will seek the most … Read more
Navigate around a table top using IR
Using a
  I've had my Arduino for over a year and had done very little with it until recently.  Mainly because I didn't have the tools or knowhow to actually build … Read more
wifi remote control vie the net
Using a
I was looking at the sit when i saw the need for the internet controlled robot. coinsidently i had my spykee sitting around doing nothing. only one problem. i have … Read more
hello , this is my first robot , it is intended to be a long term project  kinda like CtC s WALTER , so far i only have the motors and motor drivers . Read more
This robot is my first robot. :)    cny70 sensors.    Cny70 driver.   Microcontroller circuits.   optocoupler circuit.   L6203 motor driver. Read more
Run 2 Motors, Fwd and Rev with PWM Control
***Update*** Well, it seems I might have smoked something. I am in the process of testing the motor driver, with a load, and using 2 motors. While my "B" channel … Read more
Manoeuvrabot is intended to be highly manoruvrable - hence it has four omni-wheels which can each be driven independently from a 4 channel motor controller. … Read more
navigate and chat over IR
Using a
This is my first project that hasnt been a kit, and i wanted to do it from scratch. its not quite a sarm in the sense that ive only built one robot, and that it … Read more
In 2008 I have built a simple balancing robot, mostly a copy from a balancing robot made using a Basic Stamp 2 SX, found on the Parallax Forum, that I have adapted … Read more
Is it wrong to give your robot a little head? Or a big head for that matter? Gone are the days of my old, clunky teaching pendant for Walter's head. I have coded a … Read more
Inter/Intranet controlled robot able to send video/voice/email and play with my kid from the office
Using a
Hi all,  I'm from The Netherlands and have a nice little girl that wants me to build a robot. Well, easier said then done so far. Since I'm an IT consultant I … Read more
Well folks, Here is some of the first tests of Walter's mapping system. There are 2 videos, one showing a mapping run and the data, the other showing the hardware I … Read more
Navigates around avoiding obstacle or bluetooth controlled.
Using a
Hi LMRs again            I've started designing a new robot which will be semi-autonomous. I got a set of Tamiya 70100 tank treads. Quality is good for … Read more
Navigate by ultrasonic sensors, track targets with moving turret via non-contact temp sensor, "shoot" with LEDs in the guns
Using a
A remote-controlled Baneblade for a HSC Software Design and development project, already done by BobPanda, thanks for the inspiration, but now with a little more … Read more
TapeBot was built following the "build your first robot" tutorial. The body is a discarded backup tape box from one of my servers at work. The processor is PicAxe, … Read more
Hai guys, This is my new look 5 axis robotic arm. If you have read my previous post, in LMR at ----->http://letsmakerobots.com/node/10708 .This new version use … Read more
[Need help with Hardware (Encoders), see last Picture]  Hi There, although I just registred, I've been visiting this Site for a while. Now that I started my own … Read more
Autonomously navigate, find objects, sort and store them.
Using a
This was my first robot since the days of Lego Mindstorms 1.0. It was built as my senior design project. It follows all the rules to the IEEE SouthEastCon 2009 … Read more
My first robotics project and introduction into the world of electronics in general. I was going to grab the Parallax BOE Bot but while doing my research I ran … Read more
Sterylite6000 is a large and somewhat unusual robot.  Originally it was designed to use only six servos.  This worked resonably well, but did not get good ground … Read more